Engineering
Process Engineering
Feasibility stage:
PFD: Process Flow Diagrams to indicate the general flow and main components of the plant.
Heat & Mass balances: To estimates energy and conversion costs, representing each process stream (stream table) on the corresponding PFD.
Design phase:
P&ID: Piping & Instrumentation Diagram shows the piping of the process flow together with the installed equipment and instrumentation,indicating information such as diameter of piping,material of construction, insulation and type of valves and instruments.
Data sheets: Tables summarizing the technical characteristics of each piece of equipment including valves, pumps, motors and instruments,as shown on the P&ID.
S00: Sequence Of Operation: Sometimes called SOD (System Operation Description). The S00 describes in great detail how the system should work, step by step, in each mode of operation during start-up, production and shut down. TheS00 determine set points, ranges and alarms lists.
BIM - Building Information Modeling: Using the Intergraph CAD Works software we build a very detailed 3D model which gives a plant overview. The deliverables derived from CAD Works are: .
Equipment Lay out: shows the overall footprint of plant, describes the precise location of equipment such as tanks, heat exchangers, pumps, boilers, distillation columns, etc.
Piping Lay Out: Shows the top view of piping routes and cross sections, as well as .equipment and piping levels and views.
3D model: shows a 3 dimensional overview of the plant.
lsometric drawings: Each pipe section gets a single detailed drawing ready for fabrication.
BOQ: Bill Of Quantities for equipment, piping, valves and instruments.
